<thead id="iqhgk"><optgroup id="iqhgk"></optgroup></thead>
<bdo id="iqhgk"><meter id="iqhgk"></meter></bdo>
  • <span id="iqhgk"><noframes id="iqhgk">
    <span id="iqhgk"><noframes id="iqhgk">
    <bdo id="iqhgk"><mark id="iqhgk"></mark></bdo>

    <label id="iqhgk"><xmp id="iqhgk">

  • <p id="iqhgk"><mark id="iqhgk"></mark></p>

      Dongguan Weize Hardware Co., Ltd

      Elaborate production, sincere serviceFocus on the development and production of carbide rotary files 18922987188/0769-27221035

      Problem

      More

      Problem

      聯系我們

      Mr. Lin: 18922987188

      Landline: 0769-27221035

      Fax: 0769-28055429

      Email: sales1@wizzardtools.com

      Address: Building 1, Wansheng Science and 

      Technology Park, No. 15, Qinghua Road, Nancheng 

      Street, Dongguan City, Guangdong Province

      Wizzard Brand Carbide Rotary File Operation Precautions

      Time: 2021-12-30 17:05:07  View: 1302

      Precautions for operation of wizard brand cemented carbide rotary file:

      ◆ replace the blunt rotary file in time. The cutting efficiency of the blunt rotary file is very low, so the pressure of the mill has to be increased to improve the speed. In this way, it is bound to cause damage to the rotary file and the mill at the same time, and the loss of consumption is far greater than the cost of replacing the rotary file.

      ◆ please choose the highest speed as far as possible in the range of cutting speed and speed we recommend, and avoid the speed lower than 3000 rpm; Low speed will reduce chip removal performance and produce tremor, resulting in reduced service life of rotary file and poor finish of machined surface;

      ◆ please choose larger head diameter and handle diameter as needed to improve efficiency;

      ◆ please select a suitable mill with stable performance, and often check whether the collet is excessively worn;

      ◆ rotate the grinder idly before use to check the state of the mill and the concentricity of the rotary file. Eccentricity and vibration will cause premature wear of the rotary file and damage to the workpiece;

      ◆ check whether the rotary file is tightly clamped with the grinding chuck before use, otherwise the handle of the rotary file may slip during use. In addition to affecting the grinding effect, the handle slip will also cause the knife handle to be impacted by continuous transverse shear force, and the local temperature will rise sharply, which may cause the handle to be injured or even broken;

      ◆ please avoid clamping the rotary file too shallow. Generally, the depth of the clamping handle should be at least 2 / 3 of the handle length, and the exposure of the handle rod should be at most 10mm (except for the extended handle), so as to ensure the safety of use;

      ◆ when using the rotary file with extended handle, the rotating speed should be properly reduced. For safety, the mill should be started after the rotary file extends into and contacts the workpiece. When the mill is started, please keep the rotary file in contact with the workpiece until the mill is closed;

      ◆ please move the processing from right to left during use to avoid horizontal reciprocating during processing, otherwise it may lead to edge collapse and premature wear;

      ◆ avoid adding too much pressure when the speed of the mill is reduced, which will overheat and blunt the rotary file;

      ◆ make the rotary file contact the workpiece as much as possible, so that more cutting edges can penetrate into the workpiece and the processing effect can be better;

      ◆ avoid the part of the tool handle contacting the workpiece, because this will overheat the rotary file and damage or even destroy the welding part;

      ◆ when it is necessary to keep the same position for continuous processing, or when processing materials with low thermal conductivity such as stainless steel and titanium alloy, the rotating speed should be appropriately reduced to avoid overheating of the tool;

      ◆ when processing high viscosity materials, lubricating oil or grease should be used to avoid the failure of the rotary file due to the blockage of the chip removal groove of the rotary file

      Safety equipment must be provided when using rotary file

      Wechat pictures_ twenty trillion and two hundred and eleven billion two hundred and thirty million one hundred and seventy thousand seven hundred and fifty-six png


      Prev: Application of wizzard brand carbide rotary file    Next: 最后一篇
      主站蜘蛛池模板: 九色综合九色综合色鬼| 久久综合精品不卡一区二区| 久久综合狠狠色综合伊人| 狠狠色丁香久久婷婷综合_中| 成人综合激情另类小说| 国产婷婷色综合AV蜜臀AV| 制服丝袜人妻综合第一页| 狠狠88综合久久久久综合网 | 婷婷综合缴情亚洲狠狠尤物| 伊人激情久久综合中文字幕| 亚洲综合久久精品无码色欲| 狠狠色狠狠色综合久久| 婷婷综合激情五月中文字幕| 久久婷婷五月综合国产尤物app| 日日狠狠久久偷偷色综合免费 | 久久综合给久久狠狠97色| 亚洲国产婷婷综合在线精品| 91精品国产综合久久四虎久久无码一级| 色天使亚洲综合一区二区| 玖玖爱zh综合伊人久久| 日韩亚洲人成在线综合日本| 伊人性伊人情综合网| 色综合视频一区二区三区| 色欲久久久久久综合网精品| 91探花国产综合在线精品| 狠狠色丁香婷婷综合激情| 伊人久久青草青青综合| 伊人婷婷色香五月综合缴激情| heyzo专区无码综合| 国产亚洲综合一区柠檬导航| 狠狠狠色丁香婷婷综合久久俺| 亚洲综合婷婷久久| 天天干天天色综合| 天天做.天天爱.天天综合网| 五月丁香六月综合缴清无码| 一本久道久久综合狠狠爱| 开心五月激情综合婷婷| 狠狠色丁香久久婷婷综合图片| 狠狠色丁香婷婷综合潮喷| 免费精品99久久国产综合精品| 亚洲伊人精品综合在合线|